英文說明書（翻譯急用）高分
Before this test must see brochures, to understand the structure of local, familiar with the operation of the role and use.
Note the starter, and then good power, a starter on, check the electrical functioning of the direction is correct.
Wang Li to manually push valve handle, up to the plate at this time, Wang Waila handle, clips decline.
Help
On a switch to start the motor, the valve handle manually pushed Wang Li, making clips Shangtai, and then handle the middle pulled free to stop, opened the door to lay the wire bundles, good customs gate, and the top side of good.
, With Da Baoji to expect on the plane, Wang Waila manual valve handle, clips dropped compaction of materials, will handle clips Wang Li pushed up, and then loading, repeat the above operation to package the size just as high.
Top-side door open, people standing by the side of the iron pipe Qiaokai Men, and win the first wire guitar, with Irons forced to pack.
Valve handle manually increase or decrease after the action must be free to return to the middle position, otherwise clips may decline and dangerous.
Each change clips up and down, the valve must be manually stopped the free position, is prohibited Skip free to operate, or may cause damage to the pump.
This machine in operation, such as tripping, should first identify the reasons for, such as 10 minutes before the start, if forced to start, will start burning and motor-coils.
In loading, the materials should be placed formation, so as to avoid clips under the oil-oriented deformation.
By packing materials must be fully Add to machines, can not be dragged to overflow on the door, otherwise the damage would lead to machines.
Each increased or decreased, the hydraulic rod should have a certain cushion, so as not to打完This is very advantageous to protect the hydraulic rod.
On a starter, action should be fast. Each time from work or to starter when the power failure cut off.
Cause of the malfunction and ruled out:
Maintenance, service
Not three months to replace a hydraulic oil, and cleaning the fuel tank and fuel tank of oil filters. The summer with (the Kunlun licensing) 68 # hydraulic oil, used in winter (Kunlun licensing) 36 # hydraulic oil.
Regular replacement整機seals (generally once a year).
Protect the orientation of the hydraulic rod to prevent the collision hair, chemical corrosion, often in the direction rod joined lubricants.
Even a half-yearly replacement shaft for flexible plastic ring to check for any damage even the axis, should be replaced.
Motor bearings should be refueled once every six months.
10. Three Guarantees:
The factory production of hydraulic machinery, the warranty to three months, every one of the conditions to be collected materials.
Not to use the instructions of the damage caused.
Product quality problems are not caused damage.
Switching the warranty to three months, the electrical three months.
Overload led to the long-term damage.
Changes lead to damage to the factory settings.
As packaging materials placed at the formation caused no damage.
As transportation, get off on the damage caused.